What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
12.06.2025 03:09

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
2024–10–14 [Omar Gharbi Omar Gharbi ]
2024–10–10[John johnson John Johnson ]
How do you know if your husband loves you truly and deeply?
So, the voltage could go up to 500 volts, and the fuse will not open up.
There are two important concepts here.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Adventure Calls from the Lost City of Un’Goro, Hearthstone’s Next Expansion - Blizzard Entertainment
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
what exactly is a ‘surge’ protector?
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
A fuse is a non-resetable over current circuit protector.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Do girls ever miss their first love?
[image of Common-mode choke]
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
These are simplified answers to the original question, and does not change anything I wrote above.
Four measles cases confirmed in Navajo County, first in Arizona this year - ABC15 Arizona
but this device (an Inductor) … impedes the rapid changes in the current.
What is lightning?
What does a fuse do?
What is your review of "Regent", episode 5 of Season 2 House of the Dragon?
For this case there are devices called Metal oxide varistors (MOV).
He then describes the function of a fuse.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
It's time to make friends with your viruses - Salon.com
This one hit behind the barn.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
At least they know the answer if they wanted it.
How can one learn to talk frankly?
One is “what exactly is in a ‘surge protector’ ? ”
One
a photo is worth a thousand words.
Scientists Warn: Long Work Hours May Physically Alter Your Brain - SciTechDaily
The MOV will conduct when the voltage exceeds 50% of line voltage.
But… the neutral is now “floating” because of the 1 ohm resistance.
There are three different concepts here that are getting confused.
Why do I feel so tired all the time even after a good night’s sleep?
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Why do I want to give up on men?
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
It seems Mohan does not understand the difference between a comment and an Answer.
so, what happens?
Which is the correct Tamil New Year, Thai-1 or Chithirai-1?
This is where this question deviates from being a 'generic' question, and becomes more specific.
A circuit breaker is similar, but is resettable.
Barnstars:
"Can't Believe Virat Kohli Knew...": RCB's Celebrations Amid Stampede Row Heats Up - NDTV Sports
An AC voltage/ current source, and an ac inductive load.
eight
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
It also is a device that limits the change in current flow.
The other is “what does a “fuse” do?”
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
First Sentence:
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Now when you have a certain ac resistance, then a current flows in a loop.
the problem then depends on "how fast does the fuse operate?".
I post the exact comment here.
(Dc diagram shown, AC is similar).
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
This device then solves the entire problem.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
[old diagram got deleted by accident]
Because the load is inductive, the current lags the voltage.(by a bit).
This is the picture of an electronic coil of wire wound around a core of magnetic material.
But it can get overloaded, and no longer works.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
At one ohm, the resistor has a maximum of 1 watt power.
Edit 2024–10.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
2024–10–16 [ OO OLAOYE OYEBODE ]
nine
In schematic diagrams this is the symbol for a fuse:
This is 'the assistant's answer'
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
The third is lightning and “how it gets conducted into a home.”
He then describes Rainy Season and Lightning.
This is where the MOV conducts again, and dissipated the energy.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Here is a simplified AC power diagram.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
He then asserts :
These devices are installed between the “hot” and “neutral” and protective ground.
Upvotes:
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
but I think this circuit , shows a few more pieces.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
The bolt then partially travels down the line to your home.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.